Assisted GPS

Assisted GPS, generally abbreviated as A-GPS or aGPS, is a system that can under certain conditions improve the startup performance, or time-to-first-fix (TTFF), of a GPS satellite-based positioning system. It is used extensively with GPS-capable cellular phones to make the location of a cell phone available to emergency call dispatchers.

"Standalone" or "autonomous" GPS operation uses radio signals from satellites alone. In very poor signal conditions, for example in a city, these signals may suffer multipath propagation where signals bounce off buildings, or are weakened by passing through atmospheric conditions, walls, or tree cover. When first turned on in these conditions, some standalone GPS navigation devices may not be able to fix a position due to the fragmentary signal, rendering them unable to function until a clearer signal can be received continuously for a long enough period of time.

An assisted GPS system can address these problems by using data available from a network to locate and use the satellites in poor signal conditions. For billing purposes, network providers often count this as a data access, which can cost money depending on the plan.

Basic Concepts

Standalone GPS provides first position in approximately 30–40 seconds. A Standalone GPS system needs orbital information of the satellites to calculate the current position. The data rate of the satellite signal is only 50 bits/s, so downloading orbital information like ephemeris and almanac directly from satellites typically takes a long time, and if the satellite signals are lost during the acquisition of this information, it is discarded and the standalone system has to start from scratch. In AGPS, the Network Operator deploys an AGPS server. These AGPS servers download the orbital information from the satellite and store it in the database. An AGPS capable device can connect to these servers and download this information using Mobile Network radio bearers such as GSM, CDMA, WCDMA, LTE or even using other wireless radio bearers such as Wi-Fi. Usually the data rate of these bearers is high; hence downloading orbital information takes less time.

AGPS has two modes of operation:

Mobile Station Assisted (MSA)

In MSA mode A-GPS operation, the A-GPS capable device receives acquisition assistance, reference time and other optional assistance data from the A-GPS server. With the help of the above data, the A-GPS device receives signals from the visible satellites and sends the measurements to the A-GPS server. The A-GPS server calculates the position and sends it back to the A-GPS device.

Mobile Station Based (MSB)

In MSB mode A-GPS operation, the A-GPS device receives ephemeris, reference location, reference time and other optional assistance data from the A-GPS server. With the help of the above data, the A-GPS device receives signals from the visible satellites and calculates the position.

Many mobile phones combine A-GPS and other location services including Wi-Fi Positioning System and cell-site multilateration and sometimes a hybrid positioning system.